SaniComp was developed to solve the conflict: "Optimal movement absorption in the pipeline OR a clean able solution" Costs for damaged components and sudden break-downs in the pipeline are now a thing of the past - and so are non-clean able compensators. SaniComp™ is easy to clean and absorbs at the same time movements in the pipeline. SaniComp is the optimum solution for breweries, food industries, dairies, pharmaceutical industry and the cosmetic industry.
”We have previously used compensators, but they were impossible to keep clean. Why should we use compensators again?”
This assertion is heard several times…
It is a fact that a process pipe exposed to temperature fluctuations will contract or expand because of the thermal expansions the temperature fluctuations cause.
If it is not possible to compensate for these movements damaged pipelines and pipe components could be the result with costly downtime as the consequence.
It is however possible to absorb limited movements in a loop expansion joint, but HNC Group offers an alternative solution:
SaniComp™
A compensator which is especially developed for sanitary productions. The EHEDG-certification means that SaniComp are approved for installation in nationally and internationally sanitary industries.
The bellow is the unique part
The bellow of SaniComp is different from the bellow of ordinary compensators.
The ordinary bellowAn ordinary steel bellow is true to tradition a number of convolutions placed close to each other with a significant height, that absorbs predefined movements. A compensator installed in hygienic productions must fulfil a number of demands. The compensator must be cleanable and for that reason residues of the process medium must not remain in the convolutions of the bellow after cleaning of the pipeline. An ordinary bellow is therefore not the solution as its convolutions are to deep to ensure an adequate turbulence.  |
The SaniComp bellowSaniComp fulfils both demands. It is flexible and clean able. This is due to the optimum depth of the convolutions of the bellow combined with a specific distance between these convolutions. With this construction optimum turbulence between each convolution is achieved which cleans the convolutions. The bellow geometry and through that the clean ability of the compensator is tested and verified by the guidelines of EHEDG.  |
Construktion
SaniComp is as standard designed in material W.1.4404 for process temperatures of up to max. 85ºC and pressure up to 10 bar. Other materials on request.
According to the choice of material the compensator can be cleaned with both CIP and SIP. Beyond that SaniComp, if required, can be constructed for process temperatures of up to 200ºC, and pressure of up to 25 bars.
Advantages
|
ApplicationsSaniComp is especially developed for sanitary and anti-septic industries; and used in primary and secondary pipelines as well as CIP/SIP systems:
|
